Hangers

Filter
StyleModel
A1212 FH
RFQ
A33 FH
RFQ
A66 FH
RFQ
A1010 FH
RFQ
A22 FH
RFQ
A44 FH
RFQ
A88 FH
RFQ
COOPER B-LINE -

Center Trapeze Hangers

StyleModel
AFIG 29-1-PGL
RFQ
AFIG 29-3/4-PGL
RFQ
COOPER B-LINE -

Type 4X Feed Through Wireway Hangers

StyleModel
A44-4XSBH
RFQ
B44-4XSDH
RFQ
A66-4XSBH
RFQ
B66-4XSDH
RFQ
COOPER B-LINE -

Tolco Series Fig 200C Trimline Adjustable Band Hangers

COOPER B-LINE -

Type 12 Lay In Wireway Hangers

StyleModel
A22-12LBH
RFQ
B22-12LDH
RFQ
C44-12BH
RFQ
D44-12DH
RFQ
A44-12LBH
RFQ
B44-12LDH
RFQ
C66-12BH
RFQ
D66-12DH
RFQ
C66-12LBH
RFQ
B66-12LDH
RFQ
C88-12BH
RFQ
D88-12DH
RFQ
E88-12LBH
RFQ
B88-12LDH
RFQ
StyleModel
AADA-18WH
RFQ
AADA-25WH
RFQ
StyleModel
ABRC51-F3
RFQ
ABRC51-F4
RFQ
ABRC52-F4
RFQ
ABRC53-F4
RFQ
StyleModel
AB465GRN
RFQ
AB465ZN
RFQ

Hangers

Hangers are used to mount artwork, framed documents, bulletin boards, signs & clocks. Raptor Supplies offers these hangers from brands like Dixon, Cooper B-Lineand ZSI.

Features

  • Clevis hangers are pipe hangers having a swivel yoke mounted at the top by an adjustable vertical rod. This yoke fastens to a pin holding a metal clevis to keep the pipe in place.
  • J-hangers use side mounting or hanging to support a single conduit.
  • Roller hangers / pipe rollers / pipe rolls are similar to clevis hangers, with the exception that the yoke fastens to a roller rod rather than a metal strap. The pipe is supported by and can move horizontally owing to the roller rod.
  • Pipe hangers (known as split rings) open or split in the middle and are clamped around the pipe. They permit pipework to be installed close to walls or ceilings.
  • These hangers are available in 2, 3 and 5-hole adjustable & 2-hole non-adjustable variants.

Frequently Asked Questions

How do pipe hangers work?

They relieve pressure on pipes and prevent them from sagging, swinging or swaying. Thus, they can safeguard pipelines from rupturing and colliding with other objects.

How far apart should pipe hangers be placed?

The maximum horizontal hanger spacing for ABS and PVC pipes should be 4 feet. For pipes having sizes 1 inch or less and 2-3/4 inch or greater, the maximum horizontal hanger spacing for CPVC pipe or tubing should be 3 feet.

How do you measure a clevis?

  • Clevis pins are measured from the bottom of the head to the end of the pin.
  • The effective grip length should be calculated from the bottom of the head to the top of the hole.

We are here to help!

Looking for a part not listed here?