Item | Sump/Battery Back-Up Combination System |
12VDC Battery Charger | 900 mA |
Amps | 5.2 |
Base Material | Polypropylene (Primary); Nylon (Secondary) |
Cord Length | 10 (Primary); 8 (Secondary) |
Discharge NPT | 1-1/2 In. |
Duty | Continuos (Primary); Intermitent (Secondary) |
GPH of Water @ 0 Ft. of Head | 2700 (Primary); 2040 (Secondary) |
GPH of Water @ 10 Ft. of Head | 1800 (Primary); 960 (Secondary) |
GPH of Water @ 15 Ft. of Head | 1200 (Primary); 360 (Secondary) |
GPH of Water @ 5 Ft. of Head | 2280 (Primary); 1530 (Secondary) |
Height | 21.5" |
Housing | Aluminum (Primary); ABS Plastic (Secondary) |
Housing Material | Aluminum (Primary); ABS Plastic (Secondary) |
HP | 1/3 |
Impeller Material | Polypropylene (Primary); Nylon (Secondary) |
Length | 15.5" |
Max. Dia. Solids | 1/4 |
Max. Flow | 2700 |
Max. Head | 17.5 |
Max. Liquid Temp. | 140 Degrees F |
Max. Temp. | 140 F |
Min. Sump Pit Dia. | 15 In. |
Motor Type | PSC (Primary); Brush Type DC (Secondary) |
Off Point | 3 (Primary); 9.5 (Secondary) |
On Point | 7 (Primary); 11.5 (Secondary) |
Shaft Material | Stainless Steel |
Shaft Seal | Buna N Double Lip (Primary); Buna N Double Lip (Secondary) |
Switch Type | Vertical Float |
Top Material | Polypropylene (Primary); ABS Plastic (Secondary) |
Voltage | 115 |
Width | 10" |