Eaton FT1380-115-8 is designed for crimping fittings on hydraulics and is capable of swaging hose fittings & thermoplastic hoses. It is used to fabricate hose assembly and connect to hoses of multiple sizes.
Working Mechanism:
- Push the hydraulic hose through the crimp die in the crimping machine until the hose's fitting is visible above the crimp die.
- The top of the hose should not be visible above the crimp die.
- Place the compression ring or collar above the crimp die.
- The unit uses a pump system for creating a tight grip on the end of the hose.
- This will crimp the hose end fitting onto the hose.
Features:
- Eaton FT1380-115-8 hydraulic hose crimp machine has automated electrical power for efficient operation.
- This bench mounted unit features carbon steel construction.
- It delivers voltage output up to 115V, at 50Hz frequency.
- It has a semi-programmable keypad and offers hydraulic pressure up to 10000 psi.
- It is equipped with individual die cages (that can easily slip in and out of the machine) for each hose size and has the capacity to crimp spiral & braided hose assemblies having diameters up to 1-1/4 inches.
Frequently Asked Questions:
Q. What is the maximum crimping force of the crimper?
A. This machine offers crimping force up to 10 tons.
Q. How to crimp a hydraulic hose?
A.
- Measure the hose and cut it accordingly.
- Mark the insertion depth.
- Clean the hose and load in the accurate specifications.
- Select the crimp die.
- Put the hose in the crimping machine and crimp it.
- Verify the crimp diameter.
- After cleaning, cap the hose assembly.
Change Country
