Change Country- Sign in
- Submit RFQ
Get it by May 23, Thursday
Not eligible for flat shipping. Flat shipping is available on order value AUD 150 or more and weight below 10 pounds on selected products across the platform.
Payment Methods
Delivery Partners
| Item | Centrifugal Pump |
| Amps | 14.2/7.1 |
| Bearing Type | Double Shielded Pre Lubricated Ball |
| Best Efficiency GPM @ Head | 43 @ 85 Ft. |
| Best Efficiency Range GPM @ Head | 18-65 GPM @ 110-65 Ft. |
| Drain Plug | Yes |
| Duty | Continuous |
| Frame | 56J |
| GPM @ 10 PSI | 67 |
| GPM @ 15 PSI | 66 |
| GPM @ 20 PSI | 61 |
| GPM @ 25 PSI | 55 |
| GPM @ 30 PSI | 48 |
| GPM @ 35 PSI | 39 |
| GPM @ 40 PSI | 33 |
| GPM @ 45 PSI | 18 |
| GPM of Water @ 2 Ft. of Head | 69 |
| Height | 11 13/16" |
| Housing Material | Thermoplastic |
| HP | 1.5 |
| Hz | 60 |
| Impeller Material | Noryl |
| Impeller Type | Closed |
| Inlet | 2" |
| Inlet Pressure | 30 psi |
| Length | 18.625" |
| Max. Case Pressure | 80 PSI |
| Max. Fluid Viscosity | 31 SSU |
| Max. Head | 115 ft. |
| Max. Pressure | 50 psi |
| Max. Specific Gravity | 1 |
| Motor Enclosure | TEFC |
| Motor Type | Capacitor-Start, Capacitor-Run |
| NEMA/IEC Frame | 56J |
| Outlet | 1-1/2" |
| Phase | 1 |
| Port Rotation | 90 Degrees Increments |
| RPM | 3450 |
| Screw Material | Stainless Steel |
| Seal Application | Water |
| Seal Material | Viton, Carbon, Ceramic, Stainless Steel |
| Seal Type | Viton Fitted Mechanical Shaft |
| Service Factor | 1.1 |
| Shaft Material | Stainless Steel |
| Shut-Off | 115 Ft. |
| Stages | 1 |
| Suction Lift | 25 Ft. |
| Thermal Protection | Automatic Reset |
| Type | Self-Priming |
| Voltage | 115/208-230 |
| Volute Material | Thermoplastic |
| Wetted Materials | Thermoplastic, SS,Viton,Carbon,Ceramic |
| Width | 6 9/16" |
| Ship weight (kg) | 22.7 |
| Ship height (cm) | 38.1 |
| Ship length (cm) | 60.96 |
| Ship width (cm) | 37.08 |
| HS code | 8413702005 |
| Country of Origin | CN |
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 09:00 until 17:00.
