A B Base Material: Cast Iron , Bearing Type: Ball , Cord Length: 20ft. , Diameter: 15.75" , GPM of Water @ 10 Ft. of Head: 390 , GPM of Water @ 50 Ft. of Head: 155 , Height: 28.25" , Housing: Cast Iron , Housing Material: Cast iron , Impeller Material: Cast Iron , Max. Dia. Solids: 3" , Motor RPM: 1750 , Pump Type: Manual , RPM: 1750 , Shaft Material: Stainless Steel , Shaft Seal: Silicon Carbide , Switch Type: None , Top Material: Cast Iron
Working Mechanism
- The pump is installed below the water line in the sewage containing area.
- The pump is powered by an electric motor.
- The motor turns a shaft that is connected to an impeller.
- The impeller rotates and creates a centrifugal force that pushes the sewage into the pump.
- The sewage is then pumped out of the pump through a discharge pipe.
Features
- Goulds Water Technology 3888 Series submersible sewage pumps are equipped with ball bearings for reduced friction and improved performance.
- They are made of cast iron for strength & durability and corrosion resistance.
- These submersible sewage pumps have 3 phase / capacitor start motor for improved efficiency and reduced heating.
- They come with silicone carbide shaft seals for reduced leakage.
Frequently Asked Questions
What safety precautions should be followed when working with submersible sewage pumps?
- Make sure the pump is properly grounded before operating it.
- Never operate the pump without the proper safety guards.
- Avoid contact with sewage, chemicals and electrical components to prevent shock or any other potential hazards when working with submersible sewage pumps.
- Disconnect and lockout / tagout the power supply before working on the pump.
How do I maintain these submersible sewage pumps?
- Check the pump regularly for leaks.
- Clean the pump regularly to remove debris.
- Lubricate the pump regularly to prevent wear.
- Replace the pump filter regularly to prevent clogging.
What is the speed range of these?
1750 RPM.