Duty: Standard , Finish: Powdered Epoxy Paint , Full Load Amps: 1.5 , Gear Material: Hardened and Ground Steel , Gear Type: Worm , Housing Material: Cast iron , Input RPM: 1750 , Insulation Class: B , Length Less Shaft: 6.875" , Lubrication: Klubersynth UH1 6-460 , Max. Ambient Temp.: 40 Degrees C , Motor Design: Permanent Magnet DC , Motor Enclosure Design: Totally Enclosed Nonventilated , Motor Thermal Protection: None , Mounting: Any Position Except Input Motor Shaft Up , Nameplate RPM: 1800 , Number of Stages: 1 , Output Torque @ 1/40 HP: 3600 , Overall Length: 8.375" , Pinion Material: Hardened Steel , Rotation: Forward/Reversible , RPM Range: 1701-1800 , Seal Type: Double Lip , Shaft Length: 1.5" , Shaft Orientation: Right Angle , Solid/Hollow Output Shaft: Solid , Speed Reducer Type: C-Face , Voltage: 90 VDC , Worm Gear Material: Bronze
Speed Reducers, C Face, Right Angle
Dayton speed reducers are designed to optimise speed and performance while increasing equipment longevity. These units feature a motor that transmits power to the input shaft of the reducer. The reducer converts the power to low output speed while transmitting to a connected load through the shaft. These units have cast iron housing to offer structural rigidity and strength. They are equipped with worm gears that provide a high ratio of speed reduction.