What are U-bolt nuts made of?

These nuts are made of steel / stainless steel / aluminium / polyurethane rubber, ensuring high impact and abrasion resistance.

What is the significance of nonconductive U-bolts?

These fibreglass-reinforced polyurethane U-bolts do not conduct electricity and prevent metal-to-metal corrosion. These U-bolts are chemical, UV and abrasion resistant.

What accessories are compatible with these U-bolts?

Standoff brackets can be used with U-bolts for conveying pipes, tubes and cable raceways at a distance from walls, floors and ceilings. They offer extra clearance that allows access for maintenance as well as adding & removing lines.

How do we measure the size of a U-bolt?

The length of these fasteners is measured from the bolt end to the inside of the bends. The width of these U-bolts is measured between the legs.

What mounting options do these U-bolts offer?

These U-bolts offer threaded / screw mounting for easy and secure installation.

What types of nuts can be used with U-bolts?

U-bolts are compatible with hex nuts, nylon-insert lock nuts and serrated flange lock nuts.

How to install U-bolts?

Remove both nuts from all sides of the U-bolt. Place the U-bolt around the pipe to be attached and thread the ends of the bolt through the holes in the supporting beam or structure. Thread all the nuts on each of the bolt's outer ends. Tighten the nuts that are closest to the support beam manually.Finally, tighten the outer nuts on ends of the U-bolt with a wrench or an influence tool.

What safety precautions should be taken while using U-bolts?

Before using, check for damages that may be caused due to the high pressure exerted while pulling a load with a truck. Tighten the nuts if loosen to prevent slipping. Replace the U-bolt if any crack is found. If the U-bolt is rusted, get a new one.

U-Bolts

Filter

U-bolts are used to support heavy objects from walls, poles and ceilings. Raptor Supplies offers a wide range of U-bolts from brands like Grainger, Anvil, Read More

APPROVED VENDOR -

304 Stainless Steel U-Bolt with 3/8-16 Thread, Plain Finish

Style	Model	For Pipe Size	Inside Length	Inside Width	Overall Length	Thread Length	Type	Price (inc. GST)
A	SPE108	1"	2.5"	1.5"	-	1.25"	Standard	-	RFQ
B	U17277.037.0100	1"	3.437"	1.375"	-	2.375"	Long Tangent	A$ 16.21
B	U17277.037.0125	1.25"	3 23/32"	1 11/16"	-	2.375"	Long Tangent	A$ 17.23
C	SPE105	1.25"	2.75"	1.75"	-	1.125"	Standard	A$ 139.33
D	U17567.037.0125	1.25"	2.75"	1.75"	-	1.125"	Standard	A$ 125.77
E	U17567.037.0200	2"	3.125"	2.5"	-	1.25"	Standard	A$ 151.27
B	U17277.037.0200	2"	4.437"	2.437"	-	2.5"	Long Tangent	A$ 30.58
F	SPE111	2.5"	3.625"	3"	-	1.25"	Standard	A$ 373.67
E	U17567.037.0250	2.5"	3.625"	3"	-	1.25"	Standard	A$ 150.44
E	U17567.037.0300	3"	4.125"	3.5"	-	1.25"	Standard	A$ 197.76
F	SPE112	3"	4.125"	3.5"	-	1.25"	Standard	A$ 614.46
G	U17267.037.0203	3"	2.625"	2"	3"	1.5"	Square Bend	A$ 17.01
H	U17267.037.0405	3"	4.625"	4"	5"	3"	Square Bend	A$ 26.64
I	U17567.037.0075	3/4"	2.25"	1.25"	-	1.25"	Standard	A$ 99.04
B	U17277.037.0075	3/4"	3 5/16"	1.125"	-	2.375"	Long Tangent	A$ 15.73
J	U17267.037.0403	5"	2.625"	4"	3"	1.5"	Square Bend	A$ 18.00
K	SPE259	5"	6.625"	8"	7"	3.75"	Square Bend	-	RFQ
L	U17267.037.0605	5"	4.625"	6"	5"	3"	Square Bend	A$ 21.52
M	U17267.037.0207	5"	6.625"	2"	7"	3.75"	Square Bend	A$ 26.07
N	U17267.037.0609	7"	8.625"	6"	9"	5.625"	Square Bend	A$ 36.19
O	U17267.037.0205	7"	4.625"	2"	5"	3"	Square Bend	A$ 20.37
N	U17267.037.0407	7"	6.625"	4"	7"	3.75"	Square Bend	A$ 28.27
L	U17267.037.0805	7"	4.625"	8"	5"	3"	Square Bend	A$ 28.09
P	U17267.037.0809	9"	8.625"	8"	9"	5.625"	Square Bend	A$ 43.25
P	U17267.037.0607	9"	6.625"	6"	7"	3.75"	Square Bend	A$ 30.93

APPROVED VENDOR -

Low Carbon Steel U Bolt, with 1/2-13 Thread, Zinc Finish

Style	Model	For Pipe Size	Inside Length	Inside Width	Item	Thread Length	Type	Price (inc. GST)
A	SPE56	2.5"	4.5"	3"	U-Bolt	1.625"	Standard	A$ 172.45
B	SPE206	2.5"	5 7/32"	2 15/16"	U Bolt	3"	Long Tangent	A$ 12.28
B	SPE208	3.5"	6.25"	4 1/16"	U Bolt	3"	Long Tangent	A$ 93.17
B	SPE210	5"	7 13/16"	5.625"	U Bolt	3"	Long Tangent	A$ 102.48
A	SPE59	8"	10.375"	8.75"	U-Bolt	2"	Standard	A$ 43.96

APPROVED VENDOR -

Low Carbon Steel U Bolt, with 5/16-18 Thread, Zinc Finish

Style	Model	For Pipe Size	Inside Length	Inside Width	Price (inc. GST)
A	SPE11	1"	2.187"	1.5"	A$ 41.56
B	SPE41	2.5"	3 11/16"	3"	A$ 5.65

APPROVED VENDOR -

Stainless Steel U-Bolt with 3/8-16 Thread, Plain Finish

Style	Model	For Pipe Size	Inside Length	Inside Width	Price (inc. GST)
A	U17567.037.0100	1"	2.5"	1.5"	A$ 115.19
B	U17567.037.0050	1/2"	2.25"	1"	A$ 106.46

APPROVED VENDOR -

Stainless Steel U-Bolt with 1/4-20 Thread, Plain Finish

Style	Model	For Pipe Size	Inside Length	Inside Width	Thread Length	Price (inc. GST)
A	U17567.025.0075	3/4"	2"	1.125"	3/4"	A$ 41.21
B	U17567.025.0037	3/8"	1.25"	3/4"	3/4"	A$ 31.33
A	U17567.025.0038	3/8"	2.25"	3/4"	1.5"	A$ 52.36
C	SPE97	3/8"	2.25"	3/4"	1.5"	-	RFQ

APPROVED VENDOR -

Aluminium U-Bolt with 1/4-20 Thread, Plain Finish

Style	Model	Inside Length	Thread Length	Price (inc. GST)
A	SPE148	1.25"	5/8"	A$ 0.22
A	SPE149	2.25"	1.5"	A$ 0.62

APPROVED VENDOR -

Low Carbon Steel U-Bolt with 1/4-20 Thread, Plain Finish

Style	Model	For Pipe Size	Inside Length	Inside Width	Price (inc. GST)
A	SPE179	1"	3.437"	1.375"	A$ 7.39
A	SPE177	1/2"	2 15/16"	7/8"	A$ 3.83
A	SPE178	3/4"	3.187"	1.125"	A$ 14.34

APPROVED VENDOR -

Low Carbon Steel U Bolt, with 1/4-20 Thread, Zinc Finish

Style	Model	For Pipe Size	Inside Length	Inside Width	Item	Thread Length	Type	Price (inc. GST)
A	SPE31	1/2"	1.75"	1"	U-Bolt	3/4"	Standard	A$ 23.80
B	SPE197	1/2"	2 15/16"	7/8"	U Bolt	2.5"	Long Tangent	A$ 28.91
A	SPE32	3/4"	2"	1.125"	U-Bolt	3/4"	Standard	A$ 19.94

APPROVED VENDOR -

Aluminium U-Bolt with 3/8-16 Thread, Plain Finish

Style	Model	For Pipe Size	Inside Length	Inside Width	Price (inc. GST)
A	SPE168	2.5"	3.625"	3"	A$ 6.91
A	SPE169	3"	4.125"	3.5"	A$ 6.89
B	SPE163	3/4"	2.25"	1.25"	A$ 4.58

APPROVED VENDOR -

304 Stainless Steel U-Bolt with 1/2-13 Thread, Plain Finish

Style	Model	For Pipe Size	Inside Length	Inside Width	Thread Length	Type	Price (inc. GST)
A	U17277.050.0250	2.5"	5 7/32"	2 15/16"	3"	Long Tangent	A$ 42.86
B	U17567.050.0250	2.5"	4.5"	3"	1.625"	Standard	A$ 26.33
C	U17567.050.0300	3"	5"	3.5"	1.5"	Standard	A$ 36.34
D	U17277.050.0300	3"	5.75"	3 9/16"	3"	Long Tangent	A$ 49.39
E	U17567.050.0350	3.5"	5.5"	4"	1.5"	Standard	A$ 41.05
D	U17277.050.0350	3.5"	6.25"	4 1/16"	3"	Long Tangent	A$ 47.08
C	U17567.050.0400	4"	6"	4.5"	1.5"	Standard	A$ 42.88
F	SPE116	4"	6"	4.5"	1.5"	Standard	A$ 98.89
G	U17277.050.0400	4"	6.75"	4 9/16"	3"	Long Tangent	A$ 47.37
E	U17567.050.0500	5"	7.25"	5.625"	2"	Standard	A$ 57.77
G	U17277.050.0500	5"	7 13/16"	5.625"	3"	Long Tangent	A$ 64.00
H	U17567.050.0600	6"	8.375"	6.75"	2"	Standard	A$ 68.95
H	U17567.050.0800	8"	10.375"	8.75"	2"	Standard	A$ 72.71

APPROVED VENDOR -

Low Carbon Steel U Bolt, with 3/8-16 Thread, Zinc Finish

Style	Model	For Pipe Size	Inside Length	Inside Width	Overall Length	Thread Length	Type	Price (inc. GST)
A	SPE202	1"	3.437"	1.375"	-	2.375"	Long Tangent	A$ 40.61
B	SPE49	1.5"	2.625"	2"	-	1.25"	Standard	A$ 6.38
B	SPE45	1.25"	2.75"	1.75"	-	1.125"	Standard	A$ 36.70
C	SPE24	3"	4.125"	3.5"	-	1.25"	Standard	A$ 29.79
D	U17263.037.0405	3"	4.625"	4"	5"	3"	Square Bend	A$ 9.86
A	SPE201	3/4"	3 5/16"	1.125"	-	2.375"	Long Tangent	A$ 3.32
E	U17263.037.0207	5"	6.625"	2"	7"	3.75"	Square Bend	A$ 8.45
F	U17263.037.0605	5"	4.625"	6"	5"	3"	Square Bend	A$ 8.67
G	U17263.037.0807	5"	6.625"	8"	7"	3.75"	Square Bend	A$ 11.53
H	U17263.037.0403	5"	2.625"	4"	3"	1.5"	Square Bend	A$ 5.94
I	U17263.037.0609	7"	8.625"	6"	9"	5.625"	Square Bend	A$ 11.40
D	U17263.037.0205	7"	4.625"	2"	5"	3"	Square Bend	A$ 6.93
I	U17263.037.0407	7"	6.625"	4"	7"	3.75"	Square Bend	A$ 9.02
J	U17263.037.0805	7"	4.625"	8"	5"	3"	Square Bend	A$ 9.94
K	U17263.037.0907	9"	8.625"	8"	9"	5.625"	Square Bend	A$ 12.85
K	U17263.037.0607	9"	6.625"	6"	7"	3.75"	Square Bend	A$ 9.79

APPROVED VENDOR -

304 Stainless Steel U-Bolt with 1/4-20 Thread, Plain Finish

Style	Model	For Pipe Size	Inside Length	Inside Width	Thread Length	Type	Price (inc. GST)
A	U17277.025.0100	1"	3.437"	1.375"	2.5"	Long Tangent	A$ 7.19
B	SPE123	1.25"	3"	1.75"	1.375"	Standard	A$ 15.40
C	U17277.025.0050	1/2"	2 15/16"	7/8"	2.5"	Long Tangent	A$ 4.97
D	U17567.025.0025	1/4"	1.25"	9/16"	3/4"	Standard	A$ 30.56
E	SPE89	1/4"	1.25"	9/16"	3/4"	Standard	A$ 52.56
F	SPE93	3/4"	2.25"	1.25"	1.25"	Standard	-	RFQ
A	U17277.025.0075	3/4"	3.187"	1.125"	2.5"	Long Tangent	A$ 10.01

APPROVED VENDOR -

304 Stainless Steel U-Bolt with 7/8-9 Thread, Plain Finish

Style	Model	For Pipe Size	Inside Length	Inside Width	Price (inc. GST)
A	U17277.087.1200	12"	16 1/16"	12.875"	A$ 248.45
B	U17277.087.1400	14"	17 5/16"	14.125"	A$ 359.26

APPROVED VENDOR -

304 Stainless Steel U-Bolt with 5/16-18 Thread, Plain Finish

Style	Model	For Pipe Size	Inside Length	Inside Width	Thread Length	Price (inc. GST)
A	U17567.031.0100	1"	2.187"	1.5"	1"	A$ 71.79
B	SPE100	1.5"	2 11/16"	2"	1"	-	RFQ
A	U17567.031.0050	1/2"	2.187"	1"	1.375"	A$ 52.27
B	SPE102	2.5"	3 11/16"	3"	1"	A$ 41.76

APPROVED VENDOR -

Stainless Steel U-Bolt with 5/16-18 Thread, Plain Finish

Style	Model	For Pipe Size	Inside Length	Inside Width	Thread Length	Price (inc. GST)
A	U17567.031.0101	1"	2.187"	1.375"	1"	A$ 76.14
B	SPE131	1.25"	2 11/16"	1.75"	1.5"	A$ 113.30

APPROVED VENDOR -

Low Carbon Steel U-Bolt with 3/8-16 Thread, Black Oxide Finish

Style	Model	For Pipe Size	Inside Length	Inside Width	Thread Length	Price (inc. GST)
A	SPE76	1"	2.5"	1.5"	1.25"	A$ 0.51
A	SPE77	1.25"	2.75"	1.75"	1.125"	A$ 0.57
A	SPE80	2.5"	3.625"	3"	1.25"	A$ 3.65

APPROVED VENDOR -

304 Stainless Steel U-Bolt with 5/8-11 Thread, Plain Finish

Style	Model	For Pipe Size	Inside Length	Inside Width	Price (inc. GST)
A	U17277.062.0600	6"	9.5"	6.75"	A$ 119.02
B	U17277.062.0800	8"	11.125"	8.75"	A$ 139.33

GRAINGER -

Steel U-Bolt, with 1/4-20 Thread

Style	Model	For Pipe Size	Inside Length	Inside Width	Price (inc. GST)
A	U17272.025.0100	1"	3.437"	1.375"	A$ 10.76
A	U17272.025.0050	1/2"	2 15/16"	7/8"	A$ 9.86
A	U17272.025.0075	3/4"	3.187"	1.125"	A$ 10.36

GRAINGER -

U-bolt Steel

Style	Model	Finish	For Pipe Size	Inside Length	Inside Width	Material	Thread Length	Thread Size	Type	Price (inc. GST)
A	U17272.075.1000	-	10"	13 13/16"	10.875"	Steel	4"	3/4-10	Long Tangent	A$ 63.93
B	U17244.075.1000	Hot Dipped Galvanized	10"	13 13/16"	10.875"	Steel	4"	3/4-10	Round Bend	A$ 155.03
C	U17567.025.0076	Plain	3/4"	3.125"	1.125"	304 Stainless Steel	1.5"	1/4-20	Round Bend	A$ 6.18
D	U17567.031.0201	Plain	2"	5.625"	2.5"	304 Stainless Steel	3"	5/16-18	Round Bend	A$ 14.28
E	U17273.075.1000	Zinc	10"	13 13/16"	10.875"	Steel	4"	3/4-10	Long Tangent	A$ 76.89

GRAINGER -

U-bolt Plate Low Carbon Steel Zinc Plated

Style	Model	Overall Length	Price (inc. GST)
A	U17253.031.0031	0.094"	A$ 8.54
B	U17253.031.0078	0.094"	A$ 11.44
C	U17253.031.0137	0.094"	A$ 12.34
D	U17253.037.0184	0.094"	A$ 17.34
E	U17253.037.0087	0.094"	A$ 11.73
F	U17253.037.0137	0.094"	A$ 13.90
G	U17253.037.0287	0.094"	A$ 19.69
H	U17253.056.0287	0.109"	A$ 19.91
I	U17253.056.0387	0.109"	A$ 15.18

GRAINGER -

U-bolt 5/16-18 inch

Style	Model	For Pipe Size	Inside Length	Inside Width	Thread Length	Price (inc. GST)
A	U17567.031.0150	1.5"	2 11/16"	2"	1"	A$ 9.55
A	U17567.031.0125	1.25"	2 11/16"	1.75"	1.125"	A$ 10.21
B	U17567.031.0200	2"	3.187"	2.5"	1"	A$ 11.70

123...6

U-Bolts

U-bolts are used to support heavy objects from walls, poles and ceilings. Raptor Supplies offers a wide range of U-bolts from brands like Grainger, Anvil, ZSI, Chicago Hardware and Calbrite. The U shape of these bolts keeps them firmly in place, providing stability to the support.

Features

They are ideal for supporting pipe assemblies transporting both liquids and gases.
These U-bolts feature screw threadings on both ends to ensure a secure connection.
These U-bolts are available in cushioned, square / round bend, plate, long tangent, round and standard configurations.
Anvil U-bolts are used with hex nuts for supporting both light & heavy loads and are also ideal for handling copper, glass, brass and aluminium pipes. These U-bolts feature carbon steel / stainless steel construction for withstanding both tensile and compressive stresses. They offer zinc plated / 304 stainless steel finish for resistance against oxidation on the exposed surfaces.
For applications on leaf spring trucks and trailers, Chicago Hardware offers round bend U-bolts made of low-carbon steel / 304 stainless steel for corrosion resistance. They come with two hex nuts & NC rolled threads for ease of installation and have hot-dipped galvanised / plain / zinc finish to provide crack resistance. These U-bolts are compatible with 1/4 - 18 inch steel or wrought iron pipes.

Categories

Brands

U-Bolts

304 Stainless Steel U-Bolt with 3/8-16 Thread, Plain Finish

Low Carbon Steel U Bolt, with 1/2-13 Thread, Zinc Finish

Low Carbon Steel U Bolt, with 5/16-18 Thread, Zinc Finish

Stainless Steel U-Bolt with 3/8-16 Thread, Plain Finish

Stainless Steel U-Bolt with 1/4-20 Thread, Plain Finish

Aluminium U-Bolt with 1/4-20 Thread, Plain Finish

Low Carbon Steel U-Bolt with 1/4-20 Thread, Plain Finish

Low Carbon Steel U Bolt, with 1/4-20 Thread, Zinc Finish

Aluminium U-Bolt with 3/8-16 Thread, Plain Finish

304 Stainless Steel U-Bolt with 1/2-13 Thread, Plain Finish

Low Carbon Steel U Bolt, with 3/8-16 Thread, Zinc Finish

304 Stainless Steel U-Bolt with 1/4-20 Thread, Plain Finish

304 Stainless Steel U-Bolt with 7/8-9 Thread, Plain Finish

304 Stainless Steel U-Bolt with 5/16-18 Thread, Plain Finish

Stainless Steel U-Bolt with 5/16-18 Thread, Plain Finish

Low Carbon Steel U-Bolt with 3/8-16 Thread, Black Oxide Finish

304 Stainless Steel U-Bolt with 5/8-11 Thread, Plain Finish

Steel U-Bolt, with 1/4-20 Thread

U-bolt Steel

U-bolt Plate Low Carbon Steel Zinc Plated

U-bolt 5/16-18 inch

U-Bolts

Features

Frequently Asked Questions

We are here to help!

Looking for a part not listed here?