Split Rivets

Filter

Split rivets are designed for joining leather, textiles, wood, plastics, vehicle bumpers & dashboards for automotive part manufacturing, woodworking, fabric & leather processing applications. Choose from a broad range of rivets, available in 5/8 & 3/8 inch flange diameters on Raptor Supplies.

APPROVED VENDOR -

Split Rivet 9/64 Inch

APPROVED VENDOR 6LB79A
APPROVED VENDOR 6LB85B
StyleModelRivet LengthRivet MaterialPrice (inc. GST)
A6LB791/2"Nickel Plated SteelA$ 43.21
B6LB851/2"Brass Plated SteelA$ 48.80
A6LB813/4"Nickel Plated SteelA$ 54.43
B6LB873/4"Brass Plated SteelA$ 46.00
A6LB773/8"Nickel Plated SteelA$ 40.83
B6LB833/8"Brass Plated SteelA$ 46.75
A6LB805/8"Nickel Plated SteelA$ 50.49
B6LB865/8"Brass Plated SteelA$ 49.37
A6LB765/16"Nickel Plated SteelA$ 39.71
B6LB825/16"Brass Plated SteelA$ 40.39
A6LB787/16"Nickel Plated SteelA$ 42.97
B6LB847/16"Brass Plated SteelA$ 47.12
DISCO -

Rivet Dome, 3/16 Inch Dia., 7/8 Inch Length, 25Pk

Rivet Dome, 3/16 Inch Dia., 7/8 Inch Length, 25Pk
ModelItemPrice (inc. GST)
9278PKAD3PHAA$ 39.27
DISCO -

Rivet Dome, 3/16 Inch Dia., 1 Inch Length, 25Pk

Rivet Dome, 3/16 Inch Dia., 1 Inch Length, 25Pk
ModelItemPrice (inc. GST)
10965PKAD3PHDA$ 45.76

Split Rivets

Split rivets are designed for joining leather, textiles, wood, plastics, vehicle bumpers & dashboards for automotive part manufacturing, woodworking, fabric & leather processing applications. Choose from a broad range of rivets, available in 5/8 & 3/8 inch flange diameters on Raptor Supplies.

Features

  • Disco split rivets feature a quick snap installation mechanism for locking parts in place and all aluminium construction for delivering high abrasion resistance & durability.
  • These rivets are pre-split along the length of the shaft, forming two 'legs'. When installed, the legs of a split rivet fold back to hold the joined materials together.
  • They have sawed or split bodies with sharp ends for piercing leather, fibre, plastic or soft metals.

Frequently Asked Questions

How to set a split rivet?

  • Make sure you've punched a hole in each piece of leather before you set your rivet.
  • To accomplish this, use a simple punch tool and a rawhide mallet.
  • Insert the split rivet through the leather. Stack multiple pieces of leather onto the rivet if you're using more than one.
  • Put a washer on the back side of the rivet to keep it from pulling through the leather.
  • Insert the split rivet die between the two prongs. To open the prongs, strike the tool with a rawhide mallet.

We are here to help!

Looking for a part not listed here?

Chat with us now