TEXAS PNEUMATIC TOOLS Nuts And Washers

Texas Pneumatic Tools lockwashers prevent fasteners froom loosening due to vibrations in heavy machinery. They are placed beneath fasteners and are tightened to the required torque. These lockwashers are ideal for replacing worn out or damaged washers to prevent performance issues.

Texas Pneumatic Tools fronthead bolt nuts replace damaged bolt nuts in pneumatic rock drill machines & pavement breakers, ideal for use in mining and quarry applications.

Texas Pneumatic Tools packing nuts provide a watertight seal around the valve stem to prevent leakage. They hold the packing in place & create a tight seal in the plumbing.

Texas Pneumatic Tools backhead nuts are used with mating bolts, anchors, screws, studs & threaded rods for securely fastening equipment. The hex sided construction provides easy fastening operation when used with a ratchet or wrench.

Texas Pneumatic Tools side rod nuts are threaded fasteners used to fasten tie or side rods (present on either side of a cylinder) to a mounting surface. They feature hex-shaped construction to allow easy holding with a wrench during fastening. Choose between short and long side rod nuts, available in chrome and black oxide finish variants, respectively.

Texas Pneumatic Tools handle bolt washers are designed for uniform distribution of loads of compatible threaded bolts. These washers prevent stress-related damage when threaded bolts are driven into the material.

Texas Pneumatic Tools backhead bolt nuts are used in conjunction with bolts for connecting parts in machinery. Selected models feature steel construction for retaining threads over repeated usage.

Texas Pneumatic Tools flat washers are used for distributing the load of screwed fasteners by increasing their surface area. They provide corrosion resistance between an aluminium surface and a steel screw. Theyare placed under machine screws for reducing noise & abrasion, and offer high electrical insulation.

Texas Pneumatic Tools lock washers create tight assemblies and prevent bolts & nuts from slipping, turning & loosening due to vibrations & torque. They feature slight spiral design with splits to exert spring tensions, thereby preventing fasteners or bolted joints from loosening. Choose from a wide range of these washers, available in backhead, retainer, fronthead and throttle bolts.

Texas Pneumatic Tools bolt nuts are used in conjunction with a compatible threaded bolt to fasten and secure two or more parts. These lock nuts are best suited for high torque or vibration operations to prevent self loosening. The hex nuts (six-sided) can help secure a threaded bolt in tight spaces. These nuts can be accessed from any angle for ease of loosening or tightening using a wrench. The retainer nuts, on the other hand, snap readily onto a bolt and retain themselves in position; thereby preventing bolt loss in shear joint assemblies, especially in critical systems like flight control linkages or fuel controls.

Texas Pneumatic Tools nyloc nuts feature a nylon collar that increases friction on the screw thread to lock fasteners in place to prevent them from loosening due to vibrations or torque. They are ideal for applications where vibrations or motion could loosen or undo the nuts, such as aircraft, automobile and other industrial applications. These economic locking nuts use plastic / nylon inserts located towards the top of the nut for reducing their inner diameter & deforming over the mating thread to capture the bolts or screws and provide resistance against vibrations. They are also used to seal the bolt thread against leakage of oil, water, petrol and other liquids.

Texas Pneumatic Tools throttle valve washers are used to seal the control valve & control the flow of water. They are pressed down against the seat or flow valve, creating a closed-off seal that stops water from flowing to the spout. These washers are chemically inert for withstanding corrosive environments & substances.