Power Transmission

Test Instruments

HVAC and Refrigeration


Fleet and Vehicle Maintenance



Hand Tools

Material Handling




Plumbing Filter

Check Valves and Backflow PreventersView all

  • Backflow Preventer Accessories

    Apollo backflow preventer accessories include air gap drain kits and test cocks. Air gap drain kits are used to prevent the flow of minor discharges to portable fluid systems and can withstand pressure up to 175 psi. Test cocks are ideal for backward assembly testing or are used as isolation valves for gauges or small equipment lines.

  • Backflow Preventer Repair Kits

    These kits include an upper & lower check stem O-ring, a check disc, a diaphragm, a piston seal and a lubricant. They are used for repair and maintenance of backflow preventers.

  • Backflow Preventers

    They prevent contamination of potable water supply due to back-siphonage or back-pressure from undesirable substances. These preventers are available in bronze and lead-free bronze variants.

  • Check and Foot Valves

    These check and foot valves include a wide range of brass air cocks with a tee or lever handle. They are used for easily controlling the entry / exit of air from a plumbing line.

  • Flow Control Check Valves

    Horizontal-mounted bronze flow check valves provide positive shut-off in hydronic heating systems, boilers, indirect water heaters and chemical processing systems. They have a maximum operating pressure of 50 psi and temperature of 250 degrees Fahrenheit. These units can also be used as backflow preventers when required.

  • Vacuum Breakers

    These breakers are placed on bibcock, toilet or urinal flush valves and have a maximum operating pressure of 150 psi. They are commonly used for backflow prevention and protecting potable water from getting contaminated.

Pressure and Temperature Control ValvesView all

  • Boiler Drain Valves

    These drain valves are used with boilers, water heaters and storage tanks to drain water from a plumbing or heating system. They feature a full-flow design with a maximum pressure rating of 125 psi WOG (water, oil & gas).

  • Mixing Valves

    These mixing valves adjust the water temperature coming out of the water heater by automatically mixing the correct amount of cold water, to maintain safe and optimal outlet conditions.

  • Relief Valves

    They are used to control & relieve excess pressure in air / steam / gas lines once a preset pressure level has been exceeded, which might otherwise damage pipelines and equipment.

  • Temperature and Pressure Relief Valves

    These relief valves protect against excessive water and steam pressures generated when the thermal unit input controls fail. They can handle pressures up to 150 psi and are ideal for use with hot water boilers & heating systems.

  • Water Pressure Reducing Valves

    Pressure reducing valves include Apollo 36 ELF Series lead-free valves that are designed for reducing excess pressure in water pipes by reducing water flow.

Shut-Off ValvesView all

  • Air Cocks

    Includes a wide range of spring-loaded check and foot valves used for preventing reverse flow in a fluid or gas system

  • Ball Valve Connection Adapters

    High-quality and cost-efficient connection adapters that can operate at temperatures ranging from 32 degrees Fahrenheit to 210 degrees Fahrenheit. Have a maximum operating pressure of 600 psi

  • Ball Valves

    Wide range of bronze, brass and stainless steel inline ball valves for controlling or limiting the flow of fluids. Equipped with a rotatable flow control handle for easy operation

  • Gas Cocks

    Compatible with natural, manufactured, liquefied petroleum gas or air mixtures, and widely used in the installation of residential and commercial heating appliances. Available in lever, tee and flat-head handle options

Flow Control ValvesView all

  • Butterfly Valves

    Quarter-turn valves used to control the fluid flow in pipelines. Named after the disc shape similar to the wings of a butterfly. The valve discs rotate around a central axis to open or close the valve.

  • Gate and Globe Valves

    Gate valves are designed to provide fluid isolation by offering a positive seating in both fully open and fully closed positions, whereas globe valves utilise an additional plug or tap for the same. Available in stainless steel, carbon steel, brass and low-lead bronze body materials

  • Purge and Fill Valves

    Remove fluid, air or other gases from an HVAC or piping system to maintain a desired pressure level and protect sensitive equipment from contamination. Have bronze construction.

Valve Actuators Enclosures and AccessoriesView all

  • Electric Valve Actuators

    Control the valve operation by converting an electrical signal into a physical movement. Designed to automate the valve operation process for more efficiency, reliablity and cost-effectiveness.

  • Pneumatic Actuated Valve Accessories

    Include pneumatic valve actuator positioners to control the position of pneumatic valve actuators and improve performance & accuracy. Generally, receive a control signal from a control system and use pneumatic pressure to adjust the position of the actuator.

  • Valve Accessories

    Includes extension kit used to elevate the handle to accommodate pipe insulation. Feature plated steel body construction and include a screw, extension stem, stop and stem sleeve

Pipe Fittings and CouplingsView all

  • Brass Pipe Fittings

    Brass fittings used in marine plumbing applications to connect pipes or hoses through the hull of a boat. Designed to be watertight while withstanding the corrosive effects of saltwater.

  • Pipe Fittings
  • PVC Pipe Fittings

    Include Tectite Series 219 IPS transition adapters to connect two pipes of different sizes or types. Provide a secure and leak-free connection in plumbing, heating & cooling applications where a smooth transition between several piping systems is required.

Tube FittingsView all

  • PEX Fittings

    Used for creating high-pressure seals in various plumbing applications. Feature stainless steel body construction for reliable protection against reverse flow

  • Press Fit Fittings

    Used in plumbing & heating systems to connect pipes or tubes easily without soldering or welding. Include hoses, unions, couplings, fittings reducers, flange adapters and more.

Liquid Level Gauges and Sight IndicatorsView all

  • Gauge Cocks

    Placed on either side of gauges to control the flow of liquids or gases into the vessel through the gauge chamber. Allow the gauge to be isolated from the system for maintenance or calibration.

  • Water Gauges

    Allows the operator to keep check on the level, flow, clarity and color of the fluid in boilers and liquid lines. Feature gauge cocks on both the side of the glass gauge & an automatic ball-check shutoff valve for isolating the chamber from the vessel

Gas and Water Line ConnectorsView all

  • Water Connectors

    Include Tectite Series flex water heater hoses made of durable materials that is resistant to kinking and bursting. Feature brass fittings for easy installation and leak-free connection between the water heater & the water supply.

DrainsView all

  • Nuts and Washers

    Apollo nuts secure bolts or screws to a material using internal threads that match the threads of the bolt or screw being secured. Available in lock nut, jam nut, union nut variants and more.

GasketsView all

  • Sheet and Ring Gaskets

    Seal two mating surfaces in a piping or tubing system for a leak-proof seal between two flanges or other surfaces. Generally made of rubber, silicone or other flexible materials.

FiltrationView all

  • Y and Basket Strainers

    Designed to remove foreign matter from pipelines and prolong valve / pump / meter life. Can handle pressures up to 250 psi and suitable for water, air, gas, petroleum, steam and other fluids

Tub/FaucetsView all

  • Faucet Repair Parts

    Includes seal replacement kits used to seal various parts of valves and provide a tight connection

Sinks and FountainsView all

  • Wash Fountain Parts

    Refer to the end of the fitting that extends from the union nut for connecting to another fitting or pipe in plumbing applications. Provide secure installation & reliability.

About Apollo

Apollo chemical & corrosion-resistant valves are used to prevent the reverse flow of polluted water into potable water and maintain unidirectional fluid flow. The brand's ball valves are available in bronze, carbon steel & stainless steel variants, and feature a blowout proof stem for enhanced protection. Apollo ball valves are used to regulate and control the flow of fluids. These 70-100 Series valves feature RPTFE and TFM seat construction for excellent performance under load. 500 Series Apollo safety relief valves are ideal for closed system and pressure piping applications, owing to their high capacity, full nozzle design. They are made of bronze to conduct heat and electricity efficiently.

Major Trade Names

Hastelloy C Class 600 NPT Ball Valves

Feature 3 piece construction with enclosed fasteners to facilitate easy disassembling & easy maintenance. Equipped with spiral wound gaskets to resist excessive compression caused by high seating stre...Read More 


77VLF-140 Series, 2 piece valves made of brass for corrosion resistance and are silicone-free to prevent valve contamination. Feature Leak before Press technology to ensure quick and secure connection...Read More 

CVB Ball Cone Check Valves

Spring actuated valves providing reliable protection from reverse flow & corrosion; ideal for saturated steam service. Can be mounted in both vertical and horizontal directions with upward flow. Equip...Read More 

Apollo Competitive Advantages

Therma-Seal Insulating Tee-Handles

These insulated and 2-1/4 inch long handles are designed for ball valves used on insulated pipes. They are used to prevent the installation of new valves or retrofitting of the valve with new handles while refurbishing the piping system. They feature glass-reinforced nylon construction for low friction & wear resistance, and have a plug & cap to create a vapour seal for preventing condensation & problems arising due to sweat on the fittings. These handles come with an innovative stop plate having plated steel to allow use with 2 & 3 piece ball valves. They meet UL 2043 standards, making them ideal for air handling applications and are capable of being operated at temperatures up to 275 degrees Fahrenheit.

Frequently Asked Questions

Why is the anti-static design essential for a ball valve?

The anti-static design eliminates static sparkle caused by the friction between the ball and the non-metal body, stem & seat ball, which might cause damage to the entire pipeline system.

Are Apollo ball valves directional?

Yes, the brand's two-piece threaded end valves are bi-directional. They can be installed in both horizontal and vertical pipe runs, irrespective of flow direction and stem orientation.

What are backflow preventers?

They prevent contamination of potable water supply due to backpressure or back-siphonage from undesirable substances. Apollo backflow preventers are available in bronze and lead-free bronze variants.

Can Apollo valves be used in high-temperature applications?

The brand's 18C-400 Series and 18C-500 Series relief valves are ideal for high-temperature applications.

Can Apollo valves be automated or remotely controlled?

Yes, Apollo valves can be automated or remotely controlled using electric or pneumatic actuators and can be integrated into building management systems for remote control & monitoring.

How do I select the correct Apollo valve for my application?

To select the correct Apollo valve, consider factors like fluid type & temperature, pressure, size and flow requirements.

How do I maintain my Apollo valve?

Maintenance for Apollo valves includes regular inspection, cleaning and lubrication.

Brand Exclusive Products